Toshiba E-STUDIO 210C - Manual (Page 168)

1
2
3
4
5
6
7
8
9
10
11
12
9-26
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Saddle Stitch Unit (MJ-1020 only)
1 Perform steps 1 to 3 of the procedure for “6. ADD-
ING STAPLES Saddle Stitch Unit ”( Page 9-23).
2 Remove the empty staple case.
3 While pushing down on the lever , pull up the knob
.
4 Remove any jammed staples, and then return the
knob to its original position.
Stapler
5 Return the staple case to its original position.
- To continue to the next steps Page 9-24 (steps 5 to 7)
7. REMOVING JAMMED STAPLES (OPTIONAL)(Cont.)