Toshiba E-STUDIO 210C - Manual (Page 75)

1
2
3
4
5
6
7
8
9
10
11
12
5-5
2 Place the original(s). Page 2-9
3 Press the EDIT key to enter the editing menu, and
press the BOOK CENTER ERASE key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
4 Adjust the width of the book centre erase margin,
then press the SET key.
- The default width of the book centre erase margin is 10
mm.
- To adjust the width, press the 2mm or 50mm key and
select the desired number.
Select other copy modes as required.
5 Press the START key.
3. BOOK CENTRE ERASE
This function allows you to erase the shadow in the centre of a book original.
1 Place paper in the cassette(s). Page 2-4
- When using this mode in bypass copying ( Page 6-5), be
sure to specify the paper size.
Before
After the book centre has been erased