Toshiba E-STUDIO 210C - Manual (Page 102)

1
2
3
4
5
6
7
8
9
10
11
12
6-10
USING THE SPECIAL FUNCTIONS
3. BYPASS COPYING (Cont.)
Special Paper such as Thin Paper/Thick Paper/OHP Films/Sticker Labels
4 Press the START key.
Thin Paper/Thick Paper/Sticker Labels
1 Perform steps 1 to 2 on page 6-7.
2 Check the thickness of the paper and press the
THIN , THICK1 , THICK2 or THICK3 key. Then
press the SET key.
- When using A3-wide paper, select the THIN , PLAIN ,
THICK1 , THICK2 , or THICK3 key according to the paper
weight and then press the 305x457mm key.
- When using sticker labels, press the THICK2 key.
3 Specify the paper size as required.
Use the recommended thin paper/thick paper and sticker labels if possible. Copy paper sold at stores
is also acceptable, but paper of some brands may not be suitable to acquire a clear image. In this case,
ask your authorized Toshiba dealer.
- For A3-wide paper, the selection is done in step 2.
- Standard size paper Page 6-7 (step 4)
- Non-standard size paper Page 6-8 (steps 2 to 3)
Select other copy modes as required.