Toshiba TEC B-419-GS10-QQ - Manual (Page 20)

2. PRINTER SETUP EO1-33030
2.9 Test Print
2- 10
2.9 Test Print
The following test procedure allows you to perform a print test to verify
that the printer is operating correctly.
1. Load the media on the printer.
2. Slide the Stand-by Switch to ON while holding the [FEED] button.
The printer will start a status print.
3. After completing the status print, the test pattern is printed each time
the [FEED] button is pressed.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)