Toshiba TEC B-419-GS10-QQ - Manual (Page 16)

2. PRINTER SETUP EO1-33030
2.7 Loading the Media
2- 6
2.7 Loading the Media
The B-419 printer issues in two issue modes depending on the media
types.
Continuous mode (Fanfold paper)
•
Insert the media through the media inlet, or open the media cover and
set the media, and then close the media cover.
•
When the print command is received from the PC, the specified
numbers of media are printed continuously.
•
Pressing the [FEED] button causes one piece of media to be fed.
Cut form mode (When the auto-feed is turned ON.)
•
Insert the media through the media inlet, or open the media cover and
set the form, and then close the media cover. The media is
automatically fed to the print start position.
•
When the print command is received from the PC, the specified
numbers of media are printed one by one.
•
When unprinted data remains after issuing the media, the DATA LED
flashes slowly (indicating the printer is waiting for media supply.)
•
Pressing the [FEED] button causes one piece of media to be fed.