Toshiba TEC B-419-GS10-QQ - Manual (Page 14)

2. PRINTER SETUP EO1-33030
2.5 Turning the Printer ON/OFF
2- 4
2.5 Turning the Printer
ON/OFF
2.5.1 Turning ON the Printer
2.5.2 Turning OFF the Printer
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, slide the Stand-by switch as shown in
the diagram below. Note that ( l ) is the power ON side of the
switch.
2. Check that the ON LINE LED is illuminated.
1. To turn OFF the printer power, slide the Stand-by switch as shown
in the diagram below. Note that no mark is printed on the power
OFF side.
CAUTION!
Use the Stand-by switch
to turn the printer On/Off.
Plugging or unplugging
the power cord to turn the
printer On/Off may cause
fire, an electric shock, or
damage to the printer.
CAUTION!
1. Do not turn off the
printer power while the
media is being printed
as this may cause a
paper jam or damage
to the printer.
2. Do not turn off the
printer power while the
ON LINE light is
blinking as this may
cause damage to your
computer.
Stand-by Switch
Stand-by Switch
NOTE:
When the ERROR LED is
illuminated, refer to Section
4.1 LED State.
ON
OFF