Thermador MES301HS - Manual (Page 21)

21
A beep sounds. The appliance stops heating. Press TIMER/CLOCK to cancel the
signal early.
The appliance must be off in order to set or change the clock.
After a power outage, four zeros flash in the display.
1. Use the settings dial to set the current time.
2. Press TIMER/CLOCK.
The clock setting is accepted.
Example:
Switching daylight savings on or off on the clock.
1. Press TIMER/CLOCK repeatedly until the arrow appears after the Clock
symbol 0O.
2. Use the settings dial to change the time.
3. Press TIMER/CLOCK.
The new clock setting is accepted.
The clock can display the time in 12Ćhour or 24Ćhour display mode (see Basic
Settings).
When the appliance is off, the current time appears in the display. You can also hide
the time. In this case, the time only appears when the appliance is turned on (see
Basic Settings).
At the End of Cook Time
Setting the Clock
After a Power Outage
Changing the Time
Changing the Clock Time Display
Mode
Hiding the Time