Thermador MES301HS - Manual (Page 18)

18
Clock and Timer Settings
Use TIMER/CLOCK to access the clock and timer settings. The following options
are available:
If the appliance is off
D Q = sets the timer
D 0 = sets the clock
If the appliance is on
D Q = sets the timer
D x = sets the Cook Time, if applicable
D y = changes the End Time, if applicable
D 0 = displays the time
A short beep will sound when you are not permitted to change or adjust a setting.
The timer functions separately from operation of the appliance. It can be used as a
kitchen timer and can be set at any time.
1. Press TIMER/CLOCK.
The arrow appears after the Timer symbol WO.
2. Use the settings dial to set the timer.
The timer is set for minutes:seconds".
The timer runs on the display for a few seconds. It then moves to the background.
The W symbol indicates that the timer is running.
Press TIMER/CLOCK. The timer appears for a few seconds.
Press TIMER/CLOCK. Use the settings dial to change the timer.
Press TIMER/CLOCK and turn the settings dial to reset the timer to 00:00. The timer
disappears after a few seconds.
A beep sounds. 00:00 WO appears on the display. Press TIMER/CLOCK to cancel
the signal.
Short Beep
Setting the Timer
Accessing the Running Timer
Changing the Timer
Canceling the Timer
After the Timer Runs Out