Onkyo DR-90 - Manual (Page 39)

39
Adv
anced D
VD/VIDEO CD/
A
udio CD Operation
You can select a preferred audio language and sound system.
Good morning! ¡Buenos días! Bon jour!
Selecting Audio Language/Sound
Included on the Disc
Selecting a Playback Audio Setting
You can select a set of preferred audio language and sound
system from those included on the DVD video.
This function enables you to temporarily change the audio
language which has been selected as the automatic setting in
the setting menu (see pages 44 and 47), and select the sound
system if the DVD video is recorded in more than one sound
format.
Press AUDIO during playback.
The current audio setting is displayed for
about 3 seconds.
The abbreviation of the language appears.
Refer to the list of languages on page 57.
Press AUDIO or while the audio
setting is displayed on the TV
screen.
Each time you press AUDIO or , the set
of language and audio recording system
changes.
e.g.
: Cycles backwards
Note
Dolby Digital 5.1 Channel sound may be
displayed as “ 6CH.”
1
2
Both the left and right
channels are heard.
The left channel is heard.
The right channel is heard.
L. R
L
R
Sound system
Audio language
Audio channel
AUDIO
AUDIO
ENTER
AUDIO
→
→
→
Selecting Sound Channels of VIDEO
CDs
A VIDEO CD may have left and right sound channels and
contain sounds or languages on each channel. You can switch
these two channels to hear a preferred sound or language.
During playback, press AUDIO repeatedly to select the
sound cannel.
VCD
CLEAR
About recording systems
This DVD Receiver uses the Dolby Digital ( 6CH), DTS,
and PCM systems and cannot play DVD videos recorded in
any other sound system.
Notes
• Some discs allow you to change audio selections only by using the
disc menu. If this is the case, press MENU and choose the
appropriate language from the selections in the disc menu.
• Some discs may have only one set of audio language and sound
recording system and you cannot make this selection.
• The “Audio Language” setting in the setting menu (see page 47) is
for automatic selection of the audio language among those included
on the DVD video when the DVD is inserted. Therefore, the selection
in this section will not change the setting of “Audio Language” in the
setting menu.
• When you turn on the DVD Receiver or replace a disc, the DVD
Receiver returns to the automatic setting in the setting menu (see
page 47).
To turn off the audio setting display
Press CLEAR.
See next page.
AUDIO
DVD
SENDING/
LEARNED DVD RECEIVER TV
LEVEL SETUP
TITLE SURROUND MODE
DVD TV ENTER
RETURN
AUDIO
SEARCH
ANGLE ZOOM
CLEAR
TUNER
SETUP VIDEO 1 TAPE
VIDEO 2
INPUT SELECTOR
OPEN/ CLOSE
DIMMER SLEEP DISPLAY ON STANDBY
POWER
SUBTITLE
CH SEL
LEVEL TEST TONE
2 3 1
5 6 4
8 9 7
0 +10
MUTING
RANDOM
REPEAT A-B MEMORY VOLUME
PRESET
PAUSE FF
PLAY DOWN
STOP SLOW
UP
FR
CHANNEL TV/ VCR
POWER
REMOTE CONTROLLER RC-399M
TUNER
MENU
1,2
2
CLEAR
MENU
Audio:
Audio OUT Select : Bitstream
ENG PCM 2CH 1
A u d i o :
A u d i o :
A u d i o :
ENG
PCM
6CH
ENG 2CH
FRE 6CH
1
2
3