Getting star ted, Press enter, The normal display appears – Onkyo DR-90 User Manual
Page 19: If headphones are connected, remove the headphones
19
Getting Star
ted
Press ENTER, then press MODE
ADJ
/
repeatedly to enter the
distance between your listening
position and the center speaker.
You cannot enter the following distances:
• Distances larger than the distance set for
the front speakers.
• Distances smaller than the distance
obtained by subtracting “5 ft. (1.5 m)”
from the distance entered for the front
speakers.
Note
If the center speaker configuration is set to
“NONE” in step 4, this step will be skipped.
Press ENTER, then press MODE
ADJ
/
repeatedly to enter the
distance between your listening
position and one of the surround
speakers.
• The distance from the listening position
to one of the surround speakers must be
the same as the distance to the other
speaker.
• You cannot enter the following distances:
– Distances larger than the distance set
for the front speakers.
– Distances smaller than the distance
obtained by subtracting “15 ft. (4.5 m)”
from the distance entered for the front
speakers.
Note
If the surround speaker configuration is set to
“NONE” in step 5 this step will be skipped.
Press ENTER.
The normal display appears.
7
8
9
ENTER
PRESET /
MODE ADJ
ENTER
PRESET /
MODE ADJ
ENTER
Adjusting Each Speaker's Relative Volume
Balance – Test Tone
If headphones are connected, remove the headphones.
Slide the DVD RECEIVER/LEVEL
SETUP/TV switch to LEVEL SETUP.
Press TEST TONE.
Each speaker emits the test tone (pink
noise) in the following order:
LEFT
→
CENTER
(Front left ch.)
(Center ch.)
↑
↓
SUBWFR
RIGHT
(Subwoofer)
(Front right ch.)
↑
↓
L-SUR.
←
R-SUR.
(Surround left ch.)
(Surround right ch.)
Note
The speaker whose configuration is set to “NO”
or “NONE” will be skipped.
Press CH SEL repeatedly to select
the speaker, then press LEVEL /
to raise or lower the volume level
until you have an equal volume
balance with the other speakers at
your listening position.
The volume level can be adjusted between
–12dB and +12dB.
When you have completed the
adjustment, press TEST TONE.
Note
Set the DVD RECEIVER/LEVEL SETUP/TV
switch to DVD RECEIVER for normal use of the
remote controller.
3
2
4
TEST
TONE
4
LEVEL
2
5
CH SEL
1
TEST
TONE
4
1
DVD RECEIVER
TV
LEVEL SETUP
SENDING/
LEARNED
DVD RECEIVER
TV
LEVEL SETUP
TITLE
MENU
SURROUND MODE
DVD
TV
ENTER
RETURN
AUDIO
SEARCH
ANGLE
ZOOM
CLEAR
TUNER
SETUP
VIDEO 1
TAPE
VIDEO 2
INPUT SELECTOR
OPEN/
CLOSE
DIMMER
SLEEP
DISPLAY
ON
STANDBY
POWER
SUBTITLE
CH SEL
LEVEL
TEST
TONE
2
3
1
5
6
4
8
9
7
0
+10
MUTING
RANDOM
REPEAT
A-B
MEMORY
VOLUME
PRESET
PAUSE
FF
PLAY
DOWN
STOP
SLOW
UP
FR
CHANNEL
TV/ VCR
POWER
REMOTE CONTROLLER
RC-399M
TUNER
1
3
3
2,4
DVD RECEIVER
TV
LEVEL SETUP