Onkyo DR-90 - Manual (Page 20)

20
D O W
N U P
DISPLAY TUNING
SPEAKER
SETUP CH LEVEL ENTER
PHONES
OFF ON
STANDBY/ ON
MODE
FM MUTE
PRESET
MEMORY
DOWN UP STOP PAUSE PLAY OPEN/CLOSE
TREBLE BASS
PRESET /
MODE ADJ
MASTER VOLUME
POWER Re - EQ
SURROUND
MODE
LATE NIGHT INPUT SELECTOR
STANDBY
F M A M T V TAPE/MD
VIDEO 1 VIDEO 2 DVD
Playing DVD Videos/VIDEO CDs/Audio CDs
Basic Playback
This section shows you the basics on how to play discs.
Before playing
• DVD Videos, VIDEO CDs, and audio CDs can be played with the DVD Receiver (see “Playable discs” on page 9). Do not play anything else.
• When playing DVD videos or VIDEO CDs, turn on the TV and set the TV to the video input connected to MONITOR OUT or S VIDEO MONITOR OUT
connector on the DVD Receiver.
About the DVD , VCD , and CD marks in the pages related to DVD video/VIDEO CD/audio CD operation
DVD means “The function or title is related to DVD operation.”
VCD means “The function or title is related to VIDEO CD operation.”
CD means “The function or title is related to audio CD operation.”
Basic Operation
DVD VCD CD
1
Press OPEN/CLOSE.
The disc tray opens.
If the DVD Receiver is in standby mode when the button is pressed, it turns on
and the disc tray opens.
2
Place the disc on
the disc tray.
Put the disc in the tray with the label side
facing up.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray.
3
Press PLAY.
The disc tray closes and playback starts.
If you press OPEN/CLOSE to close the tray after
step 2, playback may automatically start
depending on the disc.
The type of the inserted disc appears.
For the other information that appears in the display, see
pages 42 and 43.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD If a title menu appears on the TV screen
VCD The DVD video has a title menu, or the VIDEO CD is
equipped with the PBC (Playback Control) function.
Follow steps 2 and 3 in "Locating a Title Using the Title Menu"
on page 23.
For details about the PBC function, see “On VIDEO CDs” on
page 9. To start playback with or without using the PBC
function, see page 56.
DVD If a sound selection menu appears on the TV screen
See "Enjoying the Sound Effects" to select the appropriate
sound using /
, then press ENTER (see the illustration of
the remote controller on the opposite page).
For example, if you need to select either "DTS” or “Stereo,”
select “DTS” since the DVD Receiver is able to reproduce
DTS (Digital Theater System) Surround sound.
CD If the sound is not reproduced from the beginning of
the disc
See "Notes" on the opposite page.