Onkyo DR-90 - Manual (Page 17)

17 17
Getting Star
ted
FIRST SETUP
TV Shape 4:3LB
Thank you for your purchase of Our DVD-Video Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
On-Screen Language ENG D O W N U P
DISPLAY TUNING SPEAKER SETUP CH LEVEL ENTER PHONES
OFF ON
STANDBY/ ON
MODE
FM MUTE PRESET MEMORY
DOWN UP STOP PAUSE PLAY OPEN/CLOSE
TREBLE BASS
PRESET / MODE ADJ
MASTER VOLUME
POWER Re - EQ
SURROUND MODE
LATE NIGHT INPUT SELECTOR
STANDBY
F M A M T V TAPE/MD
VIDEO 1 VIDEO 2 DVD
SENDING/
LEARNED
DVD RECEIVER TV
LEVEL SETUP
TITLE MENU SURROUND MODE
DVD TV ENTER
RETURN
AUDIO
SEARCH
ANGLE ZOOM
CLEAR
TUNER
SETUP VIDEO 1 TAPE
VIDEO 2
INPUT SELECTOR
OPEN/
CLOSE
DIMMER SLEEP DISPLAY
ON STANDBY
POWER
SUBTITLE
CH SEL
LEVEL TEST
TONE
2 3 1
5 6 4
8 9 7
0 +10
MUTING
RANDOM
REPEAT A-B MEMORY
VOLUME
PRESET
PAUSE FF
PLAY DOWN
STOP SLOW
UP
FR
CHANNEL
TV/ VCR
POWER
REMOTE CONTROLLER RC-399M
TUNER
Connecting the Power/Turning on the DVD Receiver
Before connecting
• Make sure that all the connections from pages 10 to 16 are completed (the connection to the TV is required).
• Turning on the DVD Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers. If
this happens, use a wall outlet on a different circuit.
2
Press the POWER switch to
switch on the main power.
The DVD Receiver enters standby mode.
The STANDBY indicator lights up.
Notes
• The buttons on the remote controller don’t operate if the POWER
switch is set to OFF.
• To switch off the main power, press the POWER switch again.
3
Press STANDBY/ON on the DVD
Receiver or POWER ON on the
remote controller.
The DVD Receiver turns on. The STANDBY indicator goes off.
The first time you turn on the DVD Receiver, the First Setup screen
appears. With the First Setup screen, select the On-Screen Language
and TV Shape according to the aspect ratio of the TV screen (see
pages 46 and 48).
1
Press / to select “On-Screen Language” then press ENTER.
2 Select a language with / , then press ENTER.
3 Press to select “TV Shape” then press ENTER.
4 Select a picture size with / then press ENTER.
5 Finally press SETUP.
All your selections are set and the First Setup screen disappears.
Notes
• To turn off the DVD Receiver, press STANDBY/ON on the DVD Receiver, or
POWER STANDBY on the remote controller. The DVD Receiver enters
standby mode. Be sure to set the volume to minimum before turning off the
DVD Receiver.
• You can change the above settings later with “Customizing the Function
Settings” on page 44.
1
Connect the power cord
to the wall outlet.
To wall outlet STANDBY indicator
(lights up when in standby mode)