Mechanical installation, Din panel cut-outs, Minimum spacing – Omega Engineering CN9400 User Manual
Page 31
Mechanical Installation
The CN9400 Controller is designed to be mounted in a 1/16 DIN
panel
cutout.
The unit is sleeve mounted with the front bezel assembly rated
NEMA4/IP66 provided that:
●
the panel is smooth and the panel cutout is accurate;
●
the mounting instructions are carefully followed.
DIN PANEL CUTOUT
1/16 DIN panel cutout size
45.0mm +0.6mm -0.0mm (1.77in. +0.02in. -0.0in.) wide
45.0mm +0.6mm -0.0mm (1.77in. +0.02in. -0.0in.) wide
9.5mm (0.374in) maximum panel thickness.
MECHANICAL INSTALLATION
27
10 mm
(0.39)
20 mm
(0.79)