Omega Engineering CN9400 - Manual (Page 25)

Function List
LEVEL 4
Access to level 4 is gained through in level 3.
Press and hold ▲ and ▼
for 10 seconds.
Enter level 4 at Lock , release ▲ and ▼ together.
Display reads
Program security using Lock
Select from three Lock options:
Press and hold ✱, press ▲ to index.
LEV.3 locks level 3 and 4 only- Technical Functions.
LEV.2 locks levels 2, 3 and 4 only - Configuration and
Technical Functions.
ALL locks all functions
Note: Locked functions and options may be read.
F unction Options [Factory settings] shown in brackets
Press ▼ to access following functions
[Auto] StAY
Program mode auto-exit switch
Auto-exit returns display to normal if 60 seconds of
key inactivity, select StAY to disable
[oFF] on
Disable SP2 alarm annunciator -AL-
Select on to disable -AL-
dir 1 to 32 [6]
Display sensitivity
dir = direct display of input
1 = maximum, 32 = minimum sensitivity
0.1 to 1.0 [0.5]
Derivative sensitivity
21
IMPORTANT NOTE FOR OEM’s: For safety and to protect settings from tampering
USE THE SOFTWARE SECURITY LOCK.... THEN REMOVE THIS SECTION.
✂
VER
PROG
NO.AL
DIS.S
DER.S
LOCK
NONE
LOCK
ALL