Onkyo HTC-V10X - Manual (Page 47)

47
Setting the Time
■ Setting the clock
This manual uses the 24-hour clock display in its explanation of how to set the clock. You can
also switch the clock to a 12-hour display.
Caution:
• In the event of a power outage, or if the power cable is disconnected from the AC outlet, the
clock indication turns off. In this case, please set the clock again.
• When using the clock functions, make sure that the power cable is connected to a proper AC
outlet that supplies power all the time.
The unit should be turned on during this procedure. If you do not press any button for
eight seconds during the procedure, the unit displays the standard screen.
For European models
If you cannot set the clock by using the ACCUCLOCK function, you can set it manually. In
this case, the ACCUCLOCK function will not automatically update the clock each day.
SW LV L CTRL STANDBY / ON
STANDBY
INPUT
SURROUND
MEMORY TIMER
CLEAR PHONES
MULTI JOG
AV CONTROLLER
MASTER VOLUME DTS PCM DIGITAL DSP STEREO(GRN )
MULTI IN(RED )
PR- 155X
PUSH TO ENTER
PL
1 1 – 4
Press TIMER on the PR-155X repeatedly
to display “CLOCK.”
When “CLOCK” appears, press MULTI JOG.
If the unit displays “AUTO,” rotate MULTI
JOG to select “MANUAL,” then press MULTI
JOG. 1
TIMER
MULTI JOG
PUSH TO ENTER
HTC-V10X_En.book Page 47 Wednesday, July 21, 2004 2:49 PM