Onkyo HTC-V10X - Manual (Page 31)

31
Setup
■ First Time Setup (for European models)
The very first time you turn on the PR-155X, the ACCUCLOCK function automatically sets the
clock by using the CT (Clock Time) information present in RDS radio broadcasts. While the
clock is being set, “WAIT” flashes on the display, as shown. It may take up to five minutes to set
the clock.
When the clock has been set, the message “CLOCK ADJUSTED” scrolls across the display,
then the day and time are displayed for a while, as shown.
The ACCUCLOCK function automatically updates the clock daily at 2 A.M., 3 A.M. and 2
P.M..
If the clock has not been set correctly, see “Setting the Time” on page 47.
■
Turning Off ACCUCLOCK
If you don’t want ACCUCLOCK to automatically update the clock at 2 A.M., 3 A.M. and 2
P.M. everyday, you can turn it off as follows.
Press TIMER button repeatedly until “CLOCK”
appears on the display, as shown.
Press MULTI JOG.
“*AUTO*” appears on the display, as shown. If
“MANUAL” appears, rotate MULTI JOG to select
“*AUTO*”.
To turn off ACCUCLOCK, press MEMORY but-
ton.
The asterisks disappear, indicating that the ACCU-
CLOCK function is off. To turn the ACCUCLOCK
function on again, press MEMORY button so that
asterisks appear.
1
2
3
These asterisks appear when
the ACCUCLOCK function is on.
HTC-V10X_En.book Page 31 Wednesday, July 21, 2004 2:49 PM