Onkyo HTC-V10X - Manual (Page 22)

22
Connections —Continued
■
Before making connections
• Be sure to insert the cable plugs completely into the jacks. If
the connection is incomplete, noise or malfunction may occur.
• Do not bundle the audio connection cables with the power
cable and/or speaker cables. Otherwise, tonal quality may dete-
riorate.
• When you use an optical cable, do not bend or coil it tightly.
Otherwise, noise or malfunction may occur.
• After all connections are completed, insert the power cable
plug into the appropriate AC outlet (page 30).
• The DIGITAL INPUT jack has a protective cap installed. When you use
this jack, remove the cap. When you are not using this jack, be sure to
replace the cap.
■
Connecting the AV controller (PR-155X) and the DVD player (DV-
S155X)
You can connect the audio output from the DV-S155X to these jacks.
Connect the PR-155X DIGITAL INPUT (OPTICAL) DVD/CD jack to the DV-S155X DIGI-
TAL OUTPUT jack using the included optical cable.
To make an
connection to other Onkyo components, connect the PR-155X DVD/CD 2CH
INPUT jacks to the DV-S155X AUDIO OUTPUT L/R jacks using an audio connection cable.
Connect the video output from the DVD player directly to the TV.
Incomplete
Insert completely
PR-155X
DV-S155X
DISPLAY
STANDBY / ON
STANDBY
DIMMER PROGRESSIVE RANDOM REPEAT
DVD PLAYER
DV-S 155X
Optical cable
Audio connection cable
HTC-V10X_En.book Page 22 Wednesday, July 21, 2004 2:49 PM