Onkyo HTC-V10X - Manual (Page 38)

38
Enjoying the Surround Sound —Continued
■
Viewing the display
SW LV L CTRL STANDBY / ON
STANDBY
INPUT
SURROUND
MEMORY TIMER
CLEAR PHONES
MULTI JOG
AV CONTROLLER
MASTER VOLUME DTS PCM DIGITAL DSP STEREO(GRN )
MULTI IN(RED )
PR- 155X
PUSH TO ENTER
PL
MULTI JOG
Repeatedly pressing MULTI JOG on the PR-155X switches
the display indication as follows. (If you stop pressing MULTI
JOG for a few seconds, the PR-155X displays the initial indication.)
If the audio signal is analog:
Playback source and volume ↔ Surround mode
If the audio signal is PCM:
If the audio signal is Dolby Digital or DTS:
Playback source and volume Surround mode Sampling frequency
(This stands for Sampling Frequency.)
Sampling frequency
Playback source and volume Surround mode Format*
MULTI JOG
PUSH TO ENTER
* The format indicators represent the following:
A: This digit indicates the number of front channels
included in the input signal.
3: Three channels, including front left, center, and front
right speakers.
2: Two channels, including front left and front right speak-
ers.
1: Monaural (one channel)
B: This digit indicates the number of surround channels included in the input signal.
2: Two channels, including surround left and surround right speakers.
1: Monaural (one channel)
0: None
C: This digit indicates whether the input signal includes LFE (Low Frequency Effect).
1: LFE included. (The subwoofer effect is strong.)
: No LFE included. (The subwoofer effect is weak.)
For example, “3/2.1” means that three front channels, two surround channels, and LFE
were recorded separately in this 5.1-channel source.
A C B
HTC-V10X_En.book Page 38 Wednesday, July 21, 2004 2:49 PM