Onkyo HTC-V10X - Manual (Page 28)

28
Connections —Continued
■
Connecting the supplied FM and AM indoor antennas (aerials)
Adjusting the position of the FM indoor antenna (aerial)
While listening to an FM program, extend the antenna (aerial) and move it in various directions
until the clearest signal is received. Then secure the antenna (aerial) with push pins in the posi-
tion with the least distortion.
Adjusting the position of the AM indoor antenna (aerial)
While listening to an AM program, set the antenna (aerial) in the direction and position where
you receive the clearest sound.
Position it as far away as possible from the unit, TVs, speaker cables, and power cords (mains
leads).
Note:
Insert one end of the AM antenna (aerial) cord into either AM antenna (aerial) connector, and
the other end into the other connector. There is no difference between one end of the AM
antenna (aerial) cord and the other end — unlike the speaker cables, which have positive and
negative poles.
■
Connecting an AM outdoor antenna (aerial)
An outdoor antenna (aerial) will be more
effective if it is stretched horizontally above
a window or outside.
Leave the supplied AM indoor antenna
(aerial) connected.
Note:
To avoid the risk of lightning and electrical
shock, grounding is necessary.
Insert into the hole.
Push up and
hold the lever. Insert the end
of the cord. Release the lever to
secure the connection.
AM indoor antenna (aerial)
FM indoor
antenna (aerial)
Outdoor antenna (aerial)
AM indoor antenna
(aerial)
insulated
antenna cable
HTC-V10X_En.book Page 28 Wednesday, July 21, 2004 2:49 PM