Onkyo L-DR7 - Manual (Page 42)

42
Changing the Input Source Setting
If you have connected an -compatible component to the MD/TAPE or CDR/VIDEO jacks, you
need to change the input source setting so that the system functions, such as Direct Change, will
work correctly.
Example: Switching from “MD” to “TAPE”:
DV D AV CONTROLLER
PDR- 15 5
INPUT STEREO
PHONES
MASTER VOLUME
MUTING
T - D
T - D PROGRESSIVE SCAN
SURROUND MODE PRESET MEMORY
ACOUSTIC CONTROL
STANDBY
TUNING / PRESET
STANDBY / ON
2, 4 1, 3
1
2
INPUT
PRESET
MEMORY
INPUT
Press INPUT / to display the current
input source.
The unit displays the current input source (MD).
Press PRESET MEMORY to display the
parameter.
The unit displays “NAME SEL” for one second.
Press INPUT / to select the con-
nected input source.
In this example, select “TAPE.”
Press PRESET MEMORY.
The unit displays “COMPLETE” and the input
source changes accordingly.
CDR VIDEO
MD TAPE
or
3
4
PRESET
MEMORY
L-DR7_E.book Page 42 Tuesday, December 24, 2002 3:10 PM