Onkyo L-DR7 - Manual (Page 41)

41
Selecting the Number of Speaker Channels
You need to configure the speaker system that you have connected to the SPEAKERS connec-
tors on the rear panel of the SWA-155X (see page 30.)
Notes
• You cannot configure the speaker channels if headphones are connected to the unit (see
page 47).
• Once you configure the speaker channels, you will not have to adjust the parameters until you
change the speaker configuration.
SP SETUP
TV/SETUP
TV/ SETUP TV/ SETUP
DISTANCE DISTANCE UP UP
DOWN DOWN
7 8 9
+10 0 SHIFT
TEST TONE SP SETUP CH SEL
T-D SETUP
ON
7 8 9
STANDBY INPUT SELECTOR
RECEIVER
COND.M LAST M FUNC.M
ANGLE AUDIO SUBTITLE
T-D/ ST LATE NIGHT
TIMER
CLEAR
PROGRAM
SEARCH
ACOUSTIC
CONTROL
SURROUND
RANDOM
--/---
MODE
1 2 3
4 5 6
TV/ SETUP TV/ SETUP
SP SETUP
LAST M
1
2 ch
5 ch
3 ch
4 ch
Press TV/SETUP, then press SP SETUP
repeatedly to select the number of
channels for the SPEAKERS system.
Press SP SETUP repeatedly within three sec-
onds to change the number of channels as
shown in the diagram on the left. (The corre-
sponding speaker configuration is described in
parentheses.)
• The unit displays the previous screen in three
seconds.
• The default setting is 5 ch.
(Left/right front speakers)
(Left/right front and center
speakers)
(Left/right front, and left/right
surround speakers)
(Left/right front, center, and left/
right surround speakers)
L-DR7_E.book Page 41 Tuesday, December 24, 2002 3:10 PM