About the function, Function, Connections – Onkyo L-DR7 User Manual
Page 36
36
■
About the
function
If you connect Onkyo Separate Collection Series components to the L-DR7, using the
cables
and audio pin cables, you can use the following system functions. An
cable is a special sys-
tem cable designed for use with Onkyo products. (An
cable is not included in this package.)
The following Separate Collection Series components are commercially available:
• MD-101A .................. MiniDisc (MD) Recorder
• CDR-201A ................ Audio CD Recorder
Note that the available components may vary depending on the area.
Refer to pages 32–35 for more information on connecting the components to the L-DR7.
• Auto Power On
– When you turn on the power or start playing one of the components connected to the L-DR7,
the PDR-155 turns on automatically. When you turn off the power to the PDR-155, all con-
nected components will be turned off.
• Direct Change
When you press the Play button on an MD recorder or CD recorder, the PDR-155 automatically
selects the component as the input source.
• Remote Control Operation
You can operate all system components using the supplied remote controller. (Refer to page 23
for more information.)
• Program Timer
You can program a timer on the PDR-155 so that playback or recording will start automatically
on the specified component at the specified time. (Refer to pages 89–95 for more information.)
• CD Dubbing
You can perform CD dubbing on an MD recorder or CD recorder from the PDR-155 by pressing
just one button. (Refer to the MD-101A or CDR-201A instruction manual for more information.)
(The CD Dubbing function cannot be used for DVDs.)
• CD Dubbing of only selected tracks
You can program the PDR-155 so that only your favorite songs will be recorded on an MD
recorder or CD recorder by pressing just one button. (Refer to the MD-101A or CDR-201A
instruction manual and page 97 of this manual.)
• Just connecting an
cable does not enable the system functions. Refer to pages 32–35 and
connect the audio pin cables correctly.
• Refer to the instruction manuals for the connected devices for more information on system
functions.
L-DR7_E.book Page 36 Tuesday, December 24, 2002 3:10 PM