Onkyo PR-SC885 - Manual (Page 8)

8
Getting to Know the AV Controller
The actual front panel has various logos printed on it. They are not shown here for clarity.
For detailed information, see the pages in parentheses.
A STANDBY/ON button (43)
Sets the AV controller to On or Standby.
B STANDBY indicator (43)
Lights up when the AV controller is on Standby and
flashes while a signal is being received from the
remote controller.
C ZONE 2 indicator (111)
Flashes when Zone 2 is being set. Lights up when
Zone 2 is on.
D ZONE 3 indicator (111)
Flashes when Zone 3 is being set. Lights up when
Zone 3 is on.
E Remote-control sensor (13)
Receives control signals from the remote controller.
F Display
See “Display” on page 10.
G DISPLAY button (77)
Displays various information about the currently
selected input source.
H MASTER VOLUME control (57)
Sets the volume of the AV controller to –
∞
dB,
–81.5 dB, –81.0 dB through +18.0 dB (relative dis-
play).
The volume level can also be displayed as an abso-
lute value. See “Volume Setup” on page 104.
I PURE AUDIO button and indicator (79)
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected. Pressing
this button again selects the previous listening
mode.
J AUDIO SEL button (78)
Selects the audio input: analog, digital, HDMI, or
multichannel.
K Input selector buttons (57)
Select the following input sources: DVD,
VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2,
TAPE, TUNER, CD, PHONO.
Front Panel
STANDBY/ON
MASTER VOLUME
CD TUNER TAPE CBL/SAT GAME/TV AUX 1 AUX 2 VCR/DVR DVD AUDIO SEL PURE AUDIO PHONO DISPLAY
PUSH TO OPEN
STANDBY
ZONE 2
ZONE 3
8 7 5 6 1 2
K J 9
4 3
Front flap Push here to open
the flap