Onkyo PR-SC885 - Manual (Page 106)

106
Advanced Setup —Continued
This section explains items on the Hardware menu.
Note:
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
Remote Control
■
Remote ID
When several Onkyo components are used in the same
room, their remote ID codes may overlap. To differenti-
ate the AV controller from the other components, you
can change its remote ID from 1, the default, to 2 or 3.
Note:
• If you do change the AV controller’s remote ID, be
sure to change the remote controller to the same ID
(see below), otherwise, you won’t be able to control it
with the remote controller.
Changing the Remote Controller’s ID
Zone 2 and Zone 3
See “Zone 2 and Zone 3” on page 109.
Hardware Setup
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “7. Hardware
Setup,” and then press [ENTER].
The Hardware Setup menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select an item, and
then press [ENTER].
The screen for that item appears.
INPUT SELECTOR
ON STANDBY
DISPLAY MUTING
GU IDE EXI T
PREV
CH
DIMMER
CDR/MD
SAT TAPE/AMP
SLEEP
MACRO
REMOTE MODE
--/--- 10 11 12
TV
TV CH
TV VOL
PLAYLIST RANDOM
DVD
AUX 1 AUX 2 GAME/TV
CBL/SAT VCR/DVR
D. TUN
CD TUNER TAPE
PHONO
REC
ENTER
TO P M ENU MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE DOCK
DVD
RECEIVER
CD
+
-
1 2 3 ZONE 3
ZONE 2
INPUT
+
-
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
SE TUP RET UR N SETUP
RECEIVER
INPUT
ENTER
Number
buttons
Remote
indicator
RECEIVER
SE
TUP
ENTER
ENTER
7.Hardware Setup
1.Remote Control
2.Zone2/Zone3
3.Tuner
4.Analog Multich
5.HDMI
ENTER
4 Use the Up and Down [ ]/[ ]
buttons to select an item, and
use the Left and Right [
]/[ ]
buttons to change it.
The items are explained below.
5 When you’ve finished, press the
[SETUP] button.
Setup closes.
1 While holding down the
[RECEIVER] REMOTE MODE but-
ton, press the TV [INPUT] button.
The Remote indicator flashes four
times.
2 Use the number buttons to enter
ID 1, 2, or 3.
The Remote indicator flashes twice.
ENTER
SE
TUP
RECEIVER
DVD CBL/SAT VCR/DVR
1 2 3