Hdmi input setup, First time setup —continued – Onkyo PR-SC885 User Manual
Page 47
47
First Time Setup
—Continued
If you connect a video component to an HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
By default, none of the HDMI inputs are assigned. The
following input selectors can be assigned: DVD,
VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2.
If you’ve connected your TV to the AV controller with an
HDMI cable, you can set the AV controller so that com-
posite video, S-Video, and component video sources are
upconverted (
*
) and output by the HDMI outputs. You
can set this for each input selector by selecting the
“- - -” option.
Notes:
• Each HDMI IN cannot be assigned to more than one
input selector.
•
For composite video, S-Video, and component
video upconversion for the HDMI OUT MAIN or
HDMI OUT SUB, the HDMI Monitor setting must
be set to Main or Sub (see page 45).
more information on video signal flow and upconver-
sion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 49.
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
HDMI Input Setup
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “1. Input/Output
Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
DISPLAY
MUTING
GU
IDE
EXI
T
PREV
CH
DIMMER
CDR/MD
SAT
TAPE/AMP
SLEEP
REMOTE MODE
ENTER
TO
P M
ENU
MEN
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE
DOCK
DVD
RECEIVER
CD
1
2
3
ZONE
3
ZONE
2
+
-
SE
TUP
RET
UR
N
2, 3
2–4
1
1, 5
IN
OUT
(
*
)
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
RECEIVER
SE
TUP
ENTER
ENTER
3
Use the Up and Down [
]/[
]
buttons to select “2. HDMI Input,”
and then press [ENTER].
The HDMI Input menu appears.
4
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[
] buttons to select:
IN1:
Select if the video component
is connected to HDMI IN 1.
IN2:
Select if the video component
is connected to HDMI IN 2.
IN3:
Select if the video component
is connected to HDMI IN 3.
IN4:
Select if the video component
is connected to HDMI IN 4.
- - -:
Select this to upconvert and
output composite video,
S-Video, and component
video sources from the HDMI
OUT.
5
Press the [SETUP] button.
Setup closes.
ENTER
ENTER
1-2.HDMI Input
DVD ---
VCR/DVR ---
CBL/SAT ---
GAME/TV ---
AUX1 ---
AUX2 ---
ENTER
ENTER
SE
TUP