Oki ES3640E - Manual (Page 68)

3
3-68 Using Command WorkStation or Command WorkStation LE
ES3640e MFP EFI Job Management Guide - 68
If the Fiery is already connected, the color of the key icon
indicates the level of access granted:
• Purple indicates Administrator access.
• Orange indicates Operator access.
• Cyan indicates Guest access.
3. Select the Administrator, Operator, or Guest option, enter your
password, and then click Log In (Command WorkStation) or Login
(Command WorkStation LE).
This manual assumes you are logged into the Fiery as Operator.
The following section discusses the three different access levels in
greater detail.
Access levels
The three possible levels of access to Command WorkStation or
Command WorkStation LE are Administrator, Operator, and Guest.
To enable maximum password protection, Administrator and
Operator passwords must be specified in Setup (see the
Configuration Guide Chapter 7 ).
When both Administrator and Operator passwords have been
specified, the access levels are as follows:
Access level Privileges and password requirements
Administrator Has full access to all Command WorkStation and
Command WorkStation LE functions; Administrator
password required. For a description of the full range
of tasks an administrator can implement, see the
Configuration Guide Chapter 3 .
Operator Has access to all Command WorkStation functions,
except Setup, font management, reordering job
priority, restarting the Fiery, clearing the Fiery hard
disk drive, and clearing the Job Log. Operator
password required.