Oki ES3640E - Manual (Page 66)

3
3-66 Using Command WorkStation or Command WorkStation LE
ES3640e MFP EFI Job Management Guide - 66
When you start Command WorkStation for the first time, the
Login Server list does not display any Fiery servers. For
instructions on configuring and adding Fiery servers to the Login
Server list, see the
User Software Installation Guide Chapter 1.
To start Command WorkStation LE†
1. In System Preferences/Network/Proxies, ensure that “SOCKS
Proxy” is not checked.
2. Open the Command WorkStation LE folder, located inside the
Applications folder on the Mac OS X hard disk.
3. Double-click the CWS LE file to start the application.
When you start Command WorkStation LE for the first time, the
server list does not display any Fiery servers. For instructions on
configuring and adding Fiery servers to the server list, see the
User Software Installation Guide Chapter 2.
Logging in to the Fiery
To establish a connection to the Fiery listed in the server list, log
in to the Fiery.
In Command WorkStation, you can maintain connections to more
than one Fiery at a time. Each Fiery connection requires an
average of 4MB of RAM. The maximum number of simultaneous
Fiery connections is limited only by the amount of RAM available
on the system running Command WorkStation. For example, if
your system has 128MB of RAM and is running Command
WorkStation exclusively, you can log in to approximately 25 Fiery
servers at one time.
To log in to the Fiery
1. From the Server menu, choose Log in/Log out (Command
WorkStation) or Login/Logout (Command WorkStation LE).