Red Hat 8.1 - Manual (Page 68)

Default Value 3
Syntax Integer
Example nsDS5ReplicaBusyWaitTime: 3
2.3.8.6. nsDS5ReplicaChangesSentSinceStartup
This read-only attribute shows the number of changes sent to this replica since the server started.
Parameter Description
Entry DN cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Range 0 to maximum 32-bit integer (2147483647)
Default Value
Syntax
Integer
Example nsDS5ReplicaChangesSentSinceStartup: 647
2.3.8.7. nsDS5ReplicaCredentials
This attribute sets the credentials for the bind DN (specified in the nsDS5ReplicaBindDN attribute) on
the remote server containing the consumer replica. The value for this attribute can be modified. When
certificate-based authentication is used, this attribute may not have a value. The example shows the
dse.ldif entry, not the actual password. If this value over LDAP or using the Console, set it to the
cleartext credentials, and let the server encrypt the value.
Parameter Description
Entry DN cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values Any valid password, which is then encrypted
using the DES reversible password encryption
schema.
Default Value
Syntax
DirectoryString {DES} encrypted_password
Example nsDS5ReplicaCredentials:{DES}
9Eko69APCJfF08A0aD0C
2.3.8.8. nsDS5ReplicaHost
This attribute sets the hostname for the remote server containing the consumer replica. Once this
attribute has been set, it cannot be modified.
Parameter Description
Entry DN cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values Any valid host server name
Default Value
Syntax
DirectoryString
Example nsDS5ReplicaHost: ldap2.example.com
2.3.8.9. nsDS5ReplicaLastInitEnd
This optional, read-only attribute states when the initialization of the consumer replica ended.
Parameter Description
Entry DN cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values YYYYMMDDhhmmssZ is the date/time in
Generalized Time form at which the connection
was opened. This value gives the time in relation
to Greenwich Mean Time. The hours are set with
a 24-hour clock. The Z at the end indicates that
the time is relative to Greenwich Mean Time.
Default Value
Syntax
GeneralizedTime
Example nsDS5ReplicaLastInitEnd: 20090504121603Z
2.3.8.10. nsDS5ReplicaLastInitStart
This optional, read-only attribute states when the initialization of the consumer replica started.
68
Chapter 2. Core Server Configuration Reference