Description, Nsds5replicabinddn, Nsds5replicabindmethod – Red Hat 8.1 User Manual
Page 67: Nsds5replicabusywaittime
Default Value
Syntax
DirectoryString
Example
cn: MasterAtoMasterB
2.3.8.2. description
Free form text description of the replication agreement. This attribute can be modified.
Parameter
Description
Entry DN
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values
Any string
Default Value
Syntax
DirectoryString
Example
description: Replication Agreement between
Server A and Server B.
2.3.8.3. nsDS5ReplicaBindDN
This attribute sets the DN to use when binding to the consumer during replication. The value of this
attribute must be the same as the one in cn=replica on the consumer replica. This may be empty if
certificate-based authentication is used, in which case the DN used is the subject DN of the certificate,
and the consumer must have appropriate client certificate mapping enabled. This can also be modified.
Parameter
Description
Entry DN
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values
Any valid DN (can be empty if client certificates
are used)
Default Value
Syntax
DirectoryString
Example
nsDS5ReplicaBindDN: cn=replication manager,
cn=config
2.3.8.4 . nsDS5ReplicaBindMethod
This attribute sets the method for the server to use to bind to the consumer server.
Parameter
Description
Entry DN
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values
SIMPLE | SSLCLIENTAUTH
The SIMPLE bind method requires a DN and
password.
Default Value
SIMPLE
Syntax
DirectoryString
Example
nsDS5ReplicaBindMethod: SIMPLE
2.3.8.5. nsDS5ReplicaBusyWaitTime
This attribute sets the amount of time in seconds a supplier should wait after a consumer sends back a
busy response before making another attempt to acquire access. The default value is three (3)
seconds. If the attribute is set to a negative value, Directory Server sends the client a message and an
LDAP_UNWILLING_T O_PERFORM error code.
The nsDS5ReplicaBusyWaitTime attribute works in conjunction with the
nsDS5ReplicaSessionPauseTime attribute. The two attributes are designed so that the
nsDS5ReplicaSessionPauseTime interval is always at least one second longer than the interval
specified for nsDS5ReplicaBusyWaitTime. The longer interval gives waiting suppliers a better chance
to gain consumer access before the previous supplier can re-access the consumer.
Set the nsDS5ReplicaBusyWaitTime attribute at any time by using changetype:modify with the
replace operation. The change takes effect for the next update session if one is already in progress.
Parameter
Description
Entry DN
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Valid Values
Any valid integer
Red Hat Directory Server 8.1 Configuration and Command Reference
67