Ricoh FAX1400L - Manual (Page 73)

Connecting the Power and Switching On
61
10
Connecting the Power and Switching On
R CAUTION:
A
Insert the power cable into the
socket located at the rear of the
machine.
B
Plug in the cable to the mains.
C
Turn the power switch on.
Important
❒ The power supply is 220–240
Vac.
❒ The power cord should not be
laid in a place where it might
trip somebody.
❒ Do not lay anything on the pow-
er cord.
❒ If you have to use an extension
cord, make sure that it is capa-
ble of carrying 300V/10A, and
that your facsimile terminal is
the only piece of equipment
connected to that cord.
Do not switch on until everything is con-
nected properly.
Holsten1AE_Advanced_FM.book Page 61 Wednesday, November 8, 2000 11:24 AM