Ricoh FAX1400L - Manual (Page 24)

Transmission Features
12
3
B
Carefully place your fax message
into the Document Guide feeder.
TRANSMIT DIAL/START
DIAL NEXT FAX NUMBER
If you dial another party
A Select another number. (Broad-
casting)
If you dial no more party
A Press the {{{{Start}}}} key to start the
transmission.
Dial Options
The Dial Options provide access to
various code features which are de-
signed to allow confidential transmis-
sion between different makers' fax
machines. Use them if the other party's
fax machine is of a different make and
supports the code features. Before you
can use the Dial Options, you need to
program Quick Dial key 09 as the Dial
Option key if you have not done so al-
ready (see the following details).
Assigning the Dial Option key
This procedure describes how to set
up Quick Dial key 09 as the Dial Op-
tion key.
A
Press
{{{{Function}}}} {{{{3}}}} {{{{1}}}}, and then
the
{{{{Yes}}}} key.
ak QUICK/hi
PRINT LISTh/SEARCHi
B
Press Quick Dial key
{{{{09}}}}.
a09 PROGRAM? Y/hi
C
Press the
{{{{Yes}}}} key.
a09 Y/N
PROGR. DIAL OPTION?
D
Press the
{{{{Yes}}}} key.
“ PROGRAMMED ” will flash on the
display.
ak QUICK/hi
PRINT LISTh/SEARCHi
E
Press the
{{{{Function}}}} key.
Using Dial Options
To use Dial Options, follow the proce-
dures below, only after you have di-
aled the destination fax number and
before pressing the
{Start} key.
A
Make sure that the machine is in
standby mode for faxing.
The display should look like this:
READY 100% 10:00
SET DOC. OR DIAL NO.
B
Place the entire document face
down into the Automatic Docu-
ment Feeder.
TRANSMIT OPTIONi
DIAL FAX NUMBER
C
Dial.
TRANSMIT Y/START
55512345kkkkkkkkkkkk
D
Press the Dial Option key (Quick
Dial 09).
Y/N
SUB? (S)
Holsten1AE_Advanced_FM.book Page 12 Wednesday, November 8, 2000 11:24 AM