Ricoh FAX1400L - Manual (Page 54)

Key Operator Settings
42
7
Setting the Phone Line Type
(Function 62)
You must match the fax machine to
the type of line you use: a tone line or
a pulse line. Then, you should con-
nect the line to the machine.
Note
❒ This function is not available in
some areas.
A
Press
{{{{Function}}}} {{{{6}}}} and enter the
access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Press
{{{{6}}}} {{{{2}}}}, and then the {{{{Yes}}}} key.
Y/NEXTi
SELECT LINE
B
Press the
{{{{Yes}}}} key.
SELECT LINE Y/hi
iTT PD
Note
❒ TT = Touch Tone
❒ PD = Pulse Dial
C
Press W W W W and V V V V to set your machine
for a tone dial line (“ TT ”) or a
pulse dial line (“ PD ”).
SELECT LINE Y/hi
TT iPD
D
Press the
{{{{Yes}}}} key.
“ PROGRAMMED ” will flash on the
display.
E
Press the
{{{{Function}}}} key.
READY 100% 10:00
SET DOC. OR DIAL NO.
Calling the Service Station
The machine has a feature called
Service Report Transmission. Use this
feature when your machine is having
problems. The machine will transmit
information about the condition of
your machine to your service repre-
sentative. A representative will then
be able to find out what the problem
is before making a visit. Service Re-
port Transmission is available when
the fax number of the service repre-
sentative has been programmed.
Important
❒ This information is sent to the des-
tination that has been registered in
your machine by a service repre-
sentative.
Sending a service report
When you need to send a service re-
port, do the following:
A
Press {{{{Function}}}} {{{{6}}}} and enter the
access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Press
{{{{7}}}} {{{{2}}}}, and then the {{{{Yes}}}} key.
START
SYSTEM PARA. TX
B
Press the
{{{{Start}}}} key.
5551234
DIALING
Holsten1AE_Advanced_FM.book Page 42 Wednesday, November 8, 2000 11:24 AM