Ricoh FAX1400L - Manual (Page 47)

Using Key Operator Settings
35
7
D
Change the on/off setting by
pressing
W W W W or V V V V.
E
Press the
{{{{Yes}}}} key, and then
{{{{Function}}}} key.
Saving Energy with the Power
Saving Timer (Function 71)
You can set sleep time to let the ma-
chine go to saving energy condition
and set the wake up time when it re-
turns to standby mode the next morn-
ing. During this Power Saver mode, a
fax message received is stored in the
memory and will be printed automat-
ically the next morning after the wake
up timer is activated.
As a typical example, you could pro-
gram the heating element inside the
printer to stay off at night and over
the weekend. (You can program dif-
ferent settings for every day of the
week.)
To use the Power Saving timer, you
must:
• Program the timers for each day of
the week.
• Switch the Power Saving timer fea-
ture on.
Setting the Power Saving time (Function 71)
Note
❒ While the Power Saving timer is
active, all incoming calls are re-
fused if the memory fills up.
- - - -Example:
For Tuesday, set the Power Saving
timer to switch the heater on at 9:00
and off at 18:00.
A
Press
{{{{Function}}}} {{{{6}}}} and enter the
access code {{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Press
{{{{7}}}} {{{{1}}}}, and then the {{{{Yes}}}} key.
Y/N
SET POWER SAVER
B
Press the
{{{{Yes}}}} Key.
SET TIMER Y/N/hi
SUN
C
Use
W W W W and V V V V to scroll through the
days of the week.
SET TIMER Y/N/hi
TUE
Note
❒ Example: Press V twice to go to
Tuesday.
D
Press the
{{{{Yes}}}} key
TIMER#1 TUE */#/Y
ON FROM 00:00
E
To change the ON to OFF, or the
other way round, press the
{{{{p p p p}}}}
or
{{{{#}}}} keys.
Note
❒ There are two timers for each
day, each with an ON/OFF set-
ting. “ON” means that the heat-
er will switch on at the time
indicated. “OFF” means that the
heater will switch off at the time
indicated.
F
Press
V V V V to move the cursor under
the time.
TIMER#1 TUE KPAD/Y
ON FROM 00:00
Holsten1AE_Advanced_FM.book Page 35 Wednesday, November 8, 2000 11:24 AM