Ricoh FAX1400L - Manual (Page 23)

11
3. Transmission Features
Handy Dialing Functions
Chain Dial
This feature allows you to compose a
telephone number from various
parts, some of which may be stored as
Quick Dial keys or Speed Dial codes,
and some of which may be entered at
the ten key pad.
You can program commonly used
area or country codes into Speed Dial
Codes or Quick Dial Keys.
Example: 01133-1-5553333 (From the
United States to Paris).
Assume that the following Quick Dial
and Speed Dial numbers have al-
ready been programmed.
• Quick Dial 01 = 01133 (Overseas to
France)
• Quick Dial 02 = 1 (Paris)
• Speed Dial 10 = 555
❖ ❖ ❖ ❖ On Hook Dial or Handset Mode:
Press
{01} {02} and the {Speed Di-
al
} key {1} {0}, and then {3} {3}
{3} {3}.
❖ ❖ ❖ ❖ Other:
Press {01} and the {Pause} key.
Then press
{02} and the {Pause}
key,
{Speed Dial} keys {1} {0}, and
then
{3} {3} {3} {3}.
Redial
If a message was not transmitted success-
fully, you can redial with just a few key-
strokes by using the
{Pause/Redial} key.
Using the Redial key
The machine can remember the last
10 numbers dialed on the numeric
keypad, and one previously dialed
Quick Dial/Speed Dial. If you have to
redial one of these numbers, just
press the
{Pause/Redial} key until the
required telephone number or name
is displayed, and then press the
{Start} key.
This feature has the following uses.
• If the machine is waiting to redial
the other party, you do not have to
wait for the redialing interval to
expire. Press the
{Pause/Redial} key
u n til t he r e qui re d te le p h on e
number or name is displayed, and
then press the
{Start} key.
• If you wish to send another mes-
sage to the same address that you
sent one to recently, you do not
have to dial the full number again
if it is still in the Redial memory.
Place the Documents in the Auto-
matic Document Feeder, then
press the
{Start} key.
A
Press the
{{{{Pause/Redial}}}} key until
the required number appears in
the display, then press the
{{{{Yes}}}}
key twice.
REDIAL Y/hi
a01 XYZ CO. NEW YORK
Holsten1AE_Advanced_FM.book Page 11 Wednesday, November 8, 2000 11:24 AM