Ricoh FAX1400L - Manual (Page 53)

Using Key Operator Settings
41
7
Setting the Country Code
(Function 61)
You can change the country code setting.
Important
❒ If you change the country code,
settings in Function 62 and 63 are
initialized.
❒ Be sure to select the correct coun-
try setting. Selecting the wrong
country may make it impossible
for you to switch to a different set-
ting. If you do accidentally make
the wrong setting and find that
you cannot correct the error, please
contact your service representative
for assistance.
Note
❒ This Function is not available in
some areas.
❒ Please contact your service repre-
sentative, if this function is not
available even though you pro-
grammed Country Code in initial
settings.
A
Press
{{{{Function}}}} {{{{6}}}} and enter the
access code
{{{{2}}}} {{{{2}}}} {{{{2}}}} {{{{2}}}}. Press
{{{{6}}}} {{{{1}}}}, and then the {{{{Yes}}}} key.
Y/NEXTi
SET OWN NAME
B
Press
V V V V until the following dis-
play is shown.
Y/NEXTi
SET COUNTRY
C
Press the {{{{Yes}}}} key.
COUNTRY Y/hi
AUSTRALIA
D
Press
W W W W or V V V V to select a country or
region name. If your country or
region name is not displayed, se-
lect “OTHERS”.
E
Press the
{{{{Yes}}}} key.
A: After selecting a country or re-
gion name in step
D, Go to step H.
B: After selecting “OTHERS” in step
D, the following display will appear.
COUNTRY CODE Y/N
22
When B is displayed, go to step
F.
F
Press the
{{{{No}}}} key, and then enter
the country code.
Important
❒ Make sure you enter the proper
country code. The machine
might function improperly if
you enter the wrong code.
COUNTRY CODE Y/N
23
Note
❒ Country Code List
G
Press the
{{{{Yes}}}} key to program
the country code.
H
Press
{{{{Function}}}} key.
Code Country / Region
20 Hong Kong
22 Australia
23 New Zealand
24 Singapore
25 Malaysia
18 Thailand
18 Viet Nam
18 Sri Lanka
18 India
Holsten1AE_Advanced_FM.book Page 41 Wednesday, November 8, 2000 11:24 AM