Ricoh FAX1400L User Manual

Page 50

Key Operator Settings

-List of all relevant user parameters
Many bit settings have no effect and are not listed. (Never change these).

Bit & Definition

Settings

5, 4: Default resolution when you send a message

RESOLUTION

Bit: 5, 4

0, 0: STANDARD
0, 1: DETAIL

1, 0: FINE

1, 1: HALFTONE

6: Default setting for transmission.

TRANSMISSION MODE

0: Memory

1: Immediate

7: If you change any of resolution, transmission mode
setting before making a transmission , then

Bit 0: The setting(s) will not return to the home position
after the transmission.

Bit 1: The setting(s) will return to the home position af-
ter the transmission.

RETURN TO HOME POSITION

0: Off

1: On

0: Automatically print memory transmission reports.

COMMUNICATION RESULT REPORT(MEMORY TX)

0: Off

1: On

2: Automatically print storage reports for memory
transmission.

FILE RESERVE REPORT(MEMORY TX)

0: Off

1: On

4: Automatically print polling reception reports.

COMMUNICATION RESULT REPORT(POLLING RX)

0: Off
1: On

5: Automatically print immediate transmission reports.

TRANSMISSION RESULT REPORT

0: Off

1: On

7: Automatically print communication reports.

JOURNAL

0: Off

1: On

7: Include the first half of the first page with reports?

INCLUSION OF PART OF IMAGE

0: Off

1: On

0: Store incoming faxes when machine is out of sup-
plies.

SUBSTITUTE RECEPTION

0: Off
1: On

1: Allow automatic reception from senders that do not
identify themselves.

CONDITIONS OF MEMORY RECEPTION

0: Accept (Free)

1: Reject (If no OWN NAME/
FAX NUMBER received)

0: Default Setting for sending a header with each page.

FAX HEADER PRINT

0: Off

1: On

Holsten1AE_Advanced_FM.book Page 38 Wednesday, November 8, 2000 11:24 AM