Ricoh 700 - Manual (Page 345)

Settings You Can Change with the User Tools
329
6
Input/Output
Menu Description
Batch (SADF) Auto Re-
set Time When you set one original at a time in the document feeder,
the Auto Feed indicator lights for a selected time after an
original is fed to show that the document feeder is ready for
another original. You can adjust this time from 3 seconds to
99.
Note
❒ Default: 10sec.
ARDF Original Table
Rise Time You can set the document feeder original table rise time.
Note
❒ Default: When Original is Set
Face-Up/Down Selec-
tion in Platen Mode When copying an original placed on the exposure glass or
loaded in the document feeder, you can specify which way
it is ejected.
Note
❒ Default: Face Up Exit
Rotate Sort Auto Paper
Continue You can specify whether to continue copying when the pa-
per of the required orientation has run out during rotate-
sorting. See “Rotate Sort” in
⇒
P.55 “Sort”.
• If you select [No] :
When paper of the required orientation runs out, the
machine stops copying and prompts you to supply copy
paper. When you load paper, the machine will continue
copying.
• If you select [Yes] :
Copying continues using copy paper of a different direc-
tion. The copy job will finish even if you have left the
machine.
Note
❒ Default: No