Original beeper sample copy, P.91 “sample copy, Original beeper – Ricoh 700 User Manual
Page 107: Sample copy
Other Functions
91
2
B
Set your originals.
C
Press the {
Start
} key.
Copying automatically starts when the {
Start
} key indicator flashes red and
green and the machine is ready for copying.
Note
❒ In Connect Copy mode, copying starts when the master unit is ready for
copying.
❒ To cancel Auto Start, press the {
Clear/Stop
} key.
❒ In Connect Copy mode, press the {
Clear/Stop
} key on the master unit to
cancel Auto Start.
Original Beeper
The beeper sounds and an error message is displayed when you leave your orig-
inals on the exposure glass after copying.
Note
❒ You can adjust when the beeper sounds with the “Auto Response (Human)
Sensor” setting:
• If set to “Yes”, the beeper sounds as soon as you leave the machine after
copying.
• If set to “No”, the beeper sounds 2 seconds after copying. See “Auto Re-
sponse (Human) Sensor” in the System Settings manual.
❒ To cancel this function, see “Original Beeper” in
.
Sample Copy
Use this function to check a copy set before making a long copy run.
Limitation
❒ This function can be used only when the Sort function has been turned on.
Note
❒ This function is only available on the master unit in Connect Copy mode.
A
Select Sort and any other functions, then enter the number of copy sets to
be made.
B
Set the originals.
C
Press the {
Sample Copy
} key.
One copy set is delivered for proof copying.