Ricoh 700 - Manual (Page 114)

Copying
98
2
B
Enter the ratio.
To select the ratio with the [ n ] and [ o ] keys
A Select a preset ratio which is close to the desired ratio by using
[Reduce]
or [Enlarge] .
B Adjust the ratios with the
[ n ] or [ o ] key.
Note
❒ To change the ratio in 1% steps, just press the [ n ] or [ o ] key. To change
the ratio in 10% steps, press and hold down the [ n ] or [ o ] key.
To enter the ratio with the number keys
A Press the
[Input Ratio] key.
B Enter the desired ratio with the number keys.
Note
❒ To change the ratio entered, press the [Clear] or { Clear/Stop } key and en-
ter the new ratio.
C Press the
[#] key.
D Press the
[OK] key.
C
Set your originals, then press the { Start } key.