Ricoh 700 User Manual
Page 116
Copying
100
2
B
Press the
[Size Mag.]
key.
C
Make sure that the
[Size Mag.]
key is highlighted.
D
Enter the length of the original with the number keys and press the
[#]
key.
Note
❒ You can enter sizes within the following ranges:
❒ To change the length entered, press the
[Clear]
or {
Clear/Stop
} key and enter
the new length.
E
Enter the length of the copy with the number keys and press the
[#]
key.
Note
❒ To change the length entered, press the
[Clear]
or {
Clear/Stop
} key and enter
the new length.
❒ To change the length after pressing the
[#]
key, select
[Original]
or
[Copy]
and enter the desired length.
F
Press the
[OK]
key.
G
Press the
[OK]
key.
H
Set your original, then press the {
Start
} key.
Metric version
1 – 999mm (in 1mm steps)
Inch version
0.1" – 99.9" (in 0.1" steps)