Ricoh 700 User Manual
Page 229
Scanning Originals
213
3
The “Doc. server: Scanning” display appears.
C
Enter a file name.
Note
❒ If you do not wish to register a file name, go to step
D.
❒ If you do not register a file name, it is stored automatically.
To set the file name
A Press the
[Change File Name]
key.
B Enter the new file name using the letter keys on the display panel.
Note
❒ You can enter up to 8 letters.
❒ To switch to the capital letter mode or small letter mode, press the
[Upper
Case]
or
[Lower Case]
key.
❒ To change the letter entered, press the
[Back Space]
,
[Clear]
, or {
Clear/
Stop
} key and enter new letters. To delete the entered letters in 1 letter
steps, press the
[BackSpace]
key. To delete all the entered letters, press
the
[Clear]
or {
Clear/Stop
} key.
C Press the
[OK]
key.
D
Enter your password.
Note
❒ If you do not wish to enter a password, go to step
E.