Blackberry Pearl 8220 - Manual (Page 217)

CA certificate:
Set the root certificate that your BlackBerry® device should use to verify that it is connecting to the correct Wi-Fi network.
Client certificate:
Set the authentication certificate that your device should use to connect to the Wi-Fi network.
Inner link security:
If necessary, set the security protocol that the Wi-Fi network supports for its inner authentication method.
Use hard token:
Set whether you use a hardware token to connect to the Wi-Fi network.
Token serial number:
If you use a software token to connect to the Wi-Fi network, set the token serial number.
Server subject for certificate validation:
If necessary, type the server subject name your device should use to verify that it is connecting to the correct Wi-Fi network.
Server SAN for certificate validation:
If necessary, type the server SAN your device should use to verify that it is connecting to the correct Wi-Fi network.
IMSI:
If your SIM card has more than one IMSI, set the IMSI that you use to connect to the Wi-Fi network.
Wi-Fi profile IP and DNS options
Automatically obtain IP address and DNS:
Set whether your BlackBerry® device receives a routable IP address, a subnet mask, DNS settings and a gateway address from the
Wi-Fi® network.
IP Address:
Type in the IP address for your device.
Subnet mask:
Type the subnet mask for the wireless access point to which your device should connect.
Primary DNS:
Type the primary DNS to which your device should connect.
Secondary DNS:
Type the secondary DNS to which your device should connect.
Default gateway address:
Type the default gateway IP address to which your device should connect.
User Guide Wireless network coverage
215