Roland cakewalk A-800PRO - Manual (Page 72)

72
Appendices
You can connect the A-PRO connected directly to a MIDI sound module, and use it to play and control the sound module.
If you’re not connecting the A-PRO to your computer via USB, you’ll need to use a separately available AC adaptor.
You can purchase the appropriate AC adaptor from your dealer.
fig.MIDI-External-e.eps
1 Use a MIDI cable to connect the A-PRO’s MIDI OUT connector to the MIDI IN connector of your MIDI sound module.
2 Connect the AC adaptor to the A-PRO’s DC IN jack.
3 Set the A-PRO’s [POWER] switch to “DC” to turn on the power.
Also, switch on the power to your MIDI sound module.
4 Set the A-PRO’s current channel to match the MIDI receive channel of your MIDI sound module.
5 When you play the keyboard, your MIDI sound module will produce sound.
Connecting the A-PRO Directly to a Sound Module
MIDI sound module (sold separately)
MIDI IN
Indicator
DC IN
MIDI OUT
AC adaptor
(sold separately)
921
* To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any
connections.
* Place the AC adaptor (sold separately) so the side with
the indicator (see illustration) faces upwards and the
side with textual information faces downwards.The
indicator will light when you plug the AC adaptor into
an AC outlet.
A-300_500_800C_e.book 72 ページ ２０１０年２月２２日 月曜日 午後９時１３分