Keyboard active part, Transpose, Shift key latch – Roland cakewalk A-800PRO User Manual
Page 62: Keyboard active part transpose shift key latch, Transpose” (p. 62), Tting (p. 62), Part (p. 62) to lower. then move the, Set active part (p. 62), P. 62
62
System Settings (EDIT Mode)
Here’s how to specify the part that will be affected by the [VALUE] knob, BENDER,
MODULATION, AFTERTOUCH, HOLD, and EXPRESSION controllers.
1
Simultaneously press the [ACT] button and the [
] button.
2
Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the
[ENTER] button.
fig.lcd-KBDACTIVEPART.eps
3
Use the [VALUE] knob to select “KBD
ACTIVE PART,” and press the
[ENTER] button.
fig.lcd-KBDACTIVEPART1.eps
4
Use the [VALUE] knob to select
“UPPER” or “LOWER.”
5
Press the [ENTER] button to return to Play mode.
Here’s how to specify the amount by which the keyboard will be transposed when you
press the [TRANSPOSE] button to turn it on.
1
Simultaneously press the [ACT] button and the [
] button.
2
Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the
[ENTER] button.
fig.lcd-TRANSPOSE.eps
3
Use the [VALUE] knob to select
“TRANSPOSE,” and press the
[ENTER] button.
fig.lcd-TRANSPOSE1.eps
4
Use the [VALUE] knob to specify the
transposition value.
You can specify a value in the range of -6 to
5 (semitones).
5
Press the [ENTER] button to return to Play mode.
This specifies whether the [SHIFT] button will operate in Unlatch mode (On when held
down, Off when released), or in Latch mode (turns On/Off each time the button is
pressed).
1
Simultaneously press the [ACT] button and the [
] button.
2
Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the
[ENTER] button.
fig.lcd-SHIFTKEYLATCH.eps
3
Use the [VALUE] knob to select
“SHIFT KEY LATCH,” and press the
[ENTER] button.
fig.lcd-SHIFTKEYLATCH1.eps
4
Use the [VALUE] knob to choose
“OFF” or “ON.”
5
Press the [ENTER] button to return
to Play mode.
KEYBOARD ACTIVE PART
TRANSPOSE
SHIFT KEY LATCH
A-300_500_800C_e.book 62 ページ ２０１０年２月２２日 月曜日 午後９時１３分