Roland cakewalk A-800PRO - Manual (Page 63)

63
System Settings (EDIT Mode)
Here’s how to specify the way in which the force of your strike on the controller pads
[A1]–[A8] will affect the velocity that is transmitted.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the
[ENTER] button.
fig.lcd-PADVELOCURVE.eps
3 Use the [VALUE] knob to select “PAD
VELO CURVE,” and press the [ENTER]
button.
fig.lcd-PADVELOCURVE1.eps
4 Use the [VALUE] knob to select the
desired PAD VELOCITY CURVE.
The number of the selected setting is shown
in the display.
5 Press the [ENTER] button to return to Play mode.
Here’s how to specify the way in which the pressure you apply to the pads will
correspond to the aftertouch data that is produced.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the
[ENTER] button.
fig.lcd-PADAFTCHCURVE.eps
3 Use the [VALUE] knob to select “PAD
AFTCH CURVE,” and press the
[ENTER] button.
fig.lcd-PADAFTCHCURVE1.eps
4 Use the [VALUE] knob to select the
desired PAD AFTERTOUCH CURVE.
The number of the selected setting is shown
in the display.
5 Press the [ENTER] button to return to Play mode.
Pad-related Settings
PAD VELOCITY CURVE
Number Type of curve Result
1
This is the most typical curve. The force with which you
strike the pad will correspond to the volume in the most
natural way.
2
Compared to curve 1, there will be greater volume
change for softer strikes on the pad.
3
Pad playing dynamics will produce little change in veloc-
ity, making it easier for you to perform at a consistent
volume.
4
Compared with curve 1, striking the pads more strongly
will produce greater change in velocity.
1
2
3
4
PAD AFTERTOUCH CURVE
Number Type of curve Result
1
This is the most typical curve. The pressure you apply to
the pad will correspond to the aftertouch value in the
most natural way.
2
Compared to curve 1, there will be more change in the
aftertouch value starting with softer pressure on the
pad.
3
Pressure applied to the pad will produce little change in
aftertouch value, making it easier for you to produce
consistent aftertouch effects.
4
Compared with curve 1, you will need to apply stronger
pressure on the pad in order to produce aftertouch.
1
2
3
4
A-300_500_800C_e.book 63 ページ ２０１０年２月２２日 月曜日 午後９時１３分