Roland cakewalk A-800PRO - Manual (Page 26)

26
Using A-PRO Editor
fig.keyboarset-e.eps
Octave shift
Specifies the octave of the UPPER and LOWER parts.
Transpose
Specifies the transposition of the keyboard.
MIDI Channel
Specifies the MIDI channel of the UPPER and LOWER parts.
Active Part
Specifies the part(s) to which the [VALUE] knob, BENDER, MODULATION, AFTERTOUCH,
HOLD, or EXPRESSION will apply.
Keyboard range settings
Specify the lower limit of the UPPER part and the upper limit of the LOWER part.
[Transmit], [Receive]
Click [Transmit] if you want to save a keyboard set on the A-PRO. Click [Receive] if you
want to load a keyboard set from the A-PRO.
Setting buttons
Specify the button ([SPLIT]/[DUAL]/[LOWER]) for which you are assigning a keyboard
set.
[Close]
Closes the Keyboard Set window.
Keyboard Set Window
6 7
1 2 3 4 5
8
What is a Keyboard Set?
Keyboard-related settings such as the MIDI channel and split point for the
UPPER and LOWER parts, and the octave settings, are collectively called a
“keyboard set.”
You can use A-PRO Editor to make keyboard set settings and store them to the
[SPLIT]/[DUAL]/[LOWER] buttons.
* Keyboard sets cannot be stored on your computer.
1
2
3
4
5
6
7
8
A-300_500_800C_e.book 26 ページ ２０１０年２月２２日 月曜日 午後９時１３分