Roland cakewalk A-800PRO - Manual (Page 32)

32
Using A-PRO Editor
Control map settings you’ve edited in A-PRO Editor can not only be transferred directly
between the A-PRO keyboard and your computer, they can also be saved on your
computer as an SMF format file.
To save an SMF file, proceed as follows.
1 Choose the [File] menu command [Save As].
If you want to overwrite the most recently opened file, choose the [File] menu
command [Save].
2 Enter a file name and click [Save].
Control map data that was saved on your computer in SMF format can be loaded into
A-PRO Editor.
To load an SMF file, proceed as follows.
1 Choose the [File] menu command [Open].
2 Specify the SMF file that you want to load, and click [Open].
* An SMF file that does not contain A-PRO control map data cannot be opened. The
SMF must contain settings for all controllers.
* The contents of the Name field can be loaded only from an SMF that was saved by
A-PRO Editor.
* It is not possible to load control maps from the PCR-300/500/800 or memory sets
from an earlier PCR series unit.
Saving a Control Map on Your Computer Loading a Control Map that was Saved on Your
Computer
A-300_500_800C_e.book 32 ページ ２０１０年２月２２日 月曜日 午後９時１３分