Roland cakewalk A-800PRO - Manual (Page 66)

66
System Settings (EDIT Mode)
This setting specifies whether the MIDI connectors will be used as a MIDI interface.
1 Simultaneously press the [ACT] button and the [ ] button.
2 Use the [VALUE] knob to select “MIDI SETTING,” and press the
[ENTER] button.
3 Use the [VALUE] knob to select “MIDI I/F SWITCH,” and press the
[ENTER] button.
4 Use the [VALUE] knob to specify the MIDI I/F setting.
The display will indicate the value you selected.
5 Press the [ENTER] button to return to Play mode.
MIDI-related Settings
MIDI I/F SWITCH
Setting Explanation
OFF
MIDI messages received by the A-PRO
keyboard will not be transmitted from the
A-PRO. MIDI messages will be exchanged
between the A-PRO and the computer, and
between the A-PRO and the external MIDI
device.
ON
The A-PRO keyboard’s MIDI connectors will
operate as a MIDI interface. MIDI messages
from the computer connected via USB to the
A-PRO will be transmitted to a sound module
connected to the A-PRO’s MIDI OUT
connector. MIDI messages from a MIDI
device connected to the A-PRO’s MIDI IN
connector will be sent to the computer.
X
X
MIDI I/F MODE OFF
MIDI messages
MIDI OUT device
MIDI IN device
A-PRO MIDI OUT
BULK reception
MIDI OUT
MIDI IN
PORT 1
PORT 2/
BULK transmission
A-PRO
A-PRO MIDI IN
A-PRO 1
A-PRO 2
USB
MIDI I/F MODE ON
MIDI messages
MIDI OUT device
MIDI IN device
A-PRO MIDI OUT
BULK reception
MIDI OUT
MIDI IN
PORT 1
PORT 2/
BULK transmission
A-PRO
A-PRO MIDI IN
USB
A-PRO 1
A-PRO 2
A-300_500_800C_e.book 66 ページ ２０１０年２月２２日 月曜日 午後９時１３分