Error message list – Roland BR-800 User Manual
Page 147
149
Editing
Mastering
Using USB
Con
venient
Functions
Appendix
es
Quic
k Star
t
Getting Read
y
to Recor
d
Recor
ding/
Pla
ybac
k
Using
Eff
ects
Using
Rh
ythm
Error Message List
An error message will appear in the display if you attempt to perform an invalid operation or if an operation could not be
executed correctly.
Take the appropriate action for the message that appears.
Message
Cause
Action
Page
Already exists!
There is a file of the same name.
Create the file using a different name.
–
Battery low!
The operating batteries have run
low.
Replace the batteries as soon as possible.
Cannot change
file name!
The file name contains some charac-
ters which are incompatible with BR-
800 or the file name is too long (File
name (excl. extension) should be
within eight characters).
Please change the file name with using your com-
puter.
Cannot erase!
You attempted to erase a step from a
song arrangement that contained
only one step.
Enter two or more steps before erasing a step.
You attempted to erase a step from a
song arrangement that contained no
data.
Erase a step that contains data.
Cannot insert!
The song arrangement exceeded 50
steps.
A song arrangement cannot have more than 50
steps.
The song arrangement exceeded 999
measures.
A song arrangement cannot have more than 999
measures.
Cannot undo!/
redo!
Undo/Redo is not possible when
there is no editing history.
Perform undo/redo after you’ve left an editing his-
tory.
–
Card full!
Recording or copying is not possible
because there isn’t enough free space
on the SD card.
Back up important data to your computer, and de-
lete unwanted data from the card.
Card locked!
Writing or erasure cannot be per-
formed because the SD card’s Lock
feature is on.
Turn off the power, remove the SD card, and turn
Lock off.
Card read
error!
Data could not be read correctly
from the SD card.
Turn off the power, reinsert the SD card securely,
and then turn on the power again.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.
Format the SD card.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.
Card write
error!
An error occurred while writing data
to the SD card.
Format the SD card. The song data you were
attempting to save will be lost.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.
Data too short!
You attempted to import a WAV file
that was shorter than one second.
The WAV file must be longer than one second for it
to be imported.
–
BR800_e.book 149 ページ 2010年3月2日 火曜日 午後6時40分