Roland BR-800 - Manual (Page 13)

15
Panel Descriptions
Display
fig.Display.eps
This shows various types of information depending on the
settings you’re making, such as volume levels, menu
screens, and parameter editing screens.
If you find the display screen difficult to read, refer to
“Adjusting the Display Contrast” (p. 128).
Song
This shows the song name.
Time
This shows the current time location in the song in
terms of “** hours (h) ** minutes(m) ** seconds(s).”
Frame
This shows the frame number of the current position in
the song.
Measure
This shows the current location in the song.
From the left, the values indicate the “measure
number” – “beat number.”
Power
This indicates the power supply status.
Tempo
This indicates the tempo of the rhythm.
Level meter
This indicates the volume.
On the BR-800, the main screen that appears (for example)
immediately after the power is turned on (see below) is
called the “Play screen.”
D_Play.eps
Indication Explanation
Power is being supplied from the AC
adaptor.
Power is being supplied from the com-
puter.
The batteries are in good condition.
The batteries are running low.
The batteries are almost empty. Install
fresh batteries as soon as possible.
The batteries are empty. Install fresh
batteries.
8
7
6
4 5 2 3
1
1
2
3
4
5
Item Explanation
INPUT This indicates the volume of the input.
TRACK
This indicates the volume of the output
from each track.
RHY
This indicates the volume of the output
from the rhythm.
L R
This indicates the volume of the output
following the [MASTER] fader.
About the Play Screen
6
7
The explanations in this manual include
illustrations that depict what should typically be
shown by the display. Note, however, that your
unit may incorporate a newer, enhanced version of
the system (e.g., includes newer sounds), so what
you actually see in the display may not always
match what appears in the manual.
BR800_e.book 15 ページ ２０１０年３月２日 火曜日 午後６時４０分